0x600000 — SMC: silent sensor

SMC “BSC failure” panic: the system management controller (built into the SoC) periodically waits for a response from each mandatory sensor; here, two sensors are missing: wireless coil (0x400000) and proximity (0x200000). With no response, it forces a restart, which repeats roughly every 3 minutes (≈180 s) as long as the sensor stays silent.

On iPhone 14 Plus, iPhone 14

Wireless charging coil + proximity sensor

High confidenceVerified sourceSMC: silent sensor

SMC “BSC failure” panic: the system management controller (built into the SoC) periodically waits for a response from each mandatory sensor; here, two sensors are missing: wireless coil (0x400000) and proximity (0x200000). With no response, it forces a restart, which repeats roughly every 3 minutes (≈180 s) as long as the sensor stays silent.

First check

Check/test the wireless coil flex and the front sensors flex, both of which must be connected.

iPhone 14 Plus ›iPhone 14 ›

On iPhone 15 Pro Max, iPhone 15 Pro

Wireless charging coil + proximity sensor

High confidenceVerified sourceSMC: silent sensor

SMC “BSC failure” panic: the system management controller (built into the SoC) periodically waits for a response from each mandatory sensor; here, two sensors are missing: proximity (0x200000) and wireless coil (0x400000). With no response, it forces a restart, which repeats roughly every 3 minutes (≈180 s) as long as the sensor stays silent.

First check

Check/test the front sensors flex and the wireless coil flex.

iPhone 15 Pro Max ›iPhone 15 Pro ›

On iPhone 17 Pro Max, iPhone 17 Pro

Charging port flex (USB-C) / barometric pressure sensor

Low confidenceVerified sourceSMC: silent sensor

SMC “BSC failure” panic: the system management controller (built into the SoC) periodically waits for a response from each mandatory sensor; here, the sensor in the charging port assembly has stopped responding (decimal value 6291456). With no response, it forces a restart, which repeats roughly every 3 minutes (≈180 s) as long as the sensor stays silent.

First check

Check the seating and condition of the charging port flex (tears, corrosion, FPC connector pins), then test with a known-good genuine flex; if the panic persists, measure the connector pins on the logic board in diode mode.

iPhone 17 Pro Max ›iPhone 17 Pro ›

Sources