iPhone 16 Plus — sensor array 0xa9: Battery

Low confidenceVerified sourceSMC: silent sensor

On the iPhone 16 Plus, 0xa9 means: Battery (data lines).

What does this code mean?

SMC “BSC failure” panic: the system management controller (built into the SoC) periodically waits for a response from each mandatory sensor; here, the battery data is no longer coming through (code 169 in decimal); typical symptom: stuck at 1% or 0% while charging. With no response, it forces a restart, which repeats roughly every 3 minutes (≈180 s) as long as the sensor stays silent.

Which part to test first?

Check whether the battery percentage is displayed (a reading stuck at 0–1% reveals lost battery data), inspect the battery connector (bent pins), test with a known-good battery, then measure the connector's data lines in diode mode.

The same code on other models

Field cases

Did you repair one? Tell us what worked: it improves the database for everyone.

Sources